Shindaiwa EC7600 Instrukcja Operatora Strona 2
- Strona / 84
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Introduction
The Shindaiwa EC7500_7600 cutoff saw
is designed and built to deliver superior
performance and reliability without
compromise to quality, comfort, safety, or
durability. Shindaiwa high performance
engines represent the leading edge of
2-cycle engine technology, and deliver
exceptionally high power at remarkably low
displacement and weight. As a professional
owner/operator, you’ll soon discover why
Shindaiwa is simply in a class by itself.
Throughout this manual are special “atten-
tion statements”.
Attention Statements
WARNING!
A statement preceded by the
triangular attention symbol and the
word “WARNING” contains informa-
tion that should be acted upon to
prevent serious bodily injury.
CAUTION!
A statement preceded by the word
“CAUTION” contains information
that should be acted upon to prevent
mechanical damage.
IMPORTANT!
A statement preceded by the word
“IMPORTANT” is one that possesses
special significance.
NOTE:
A statement preceded by the word “NOTE”
contains information that is handy to know
and may make your job easier.
IMPORTANT!
The procedures described in this manual are intended to help you get the most from your unit as well as to protect you and others from
harm. These procedures are guidelines for safe operation under most conditions, and are not intended to replace any safety rules and/or
laws that may be in force in your area. If you have questions regarding your power tool, or if you do not understand something in this
manual, your Shindaiwa dealer will be glad to assist you. You may also contact Shindaiwa at the address printed on the back of this Manual.
Shindaiwa Inc. reserves the right to make
changes to products without prior notice,
and without obligation to make alterations
to units previously manufactured.
IMPORTANT!
The information contained in these
instructions describes units available at
the time of publication.
Safety and Operation Information Labels
Contents
PAGE PAGEPAGE
Introduction .................................................. 2
Attention Statements ................................... 2
Safety and Operation Information Labels .. 2
Safety Precautions ........................................ 3
Safety Labels ................................................... 5
Unit Description ...........................................6
Specifications ................................................ 6
Assembly ....................................................... 7
Mixing fuel .................................................... 8
Filling the fuel tank ......................................8
Starting the engine ......................................9
Stopping the Engine .................................. 10
Operation .................................................... 11
Inspection and Maintenance ..................... 13
Long Term Storage ....................................17
Troubleshooting Guide ............................. 18
Declaration of Conformity .........................19
2
50:1
Ratio of Fuel/Oil Mixture
Fuel Filler Opening
BE AWARE OF THROWN
OBJECTS!
SOUND POWER LEVEL
(measured in accordance with
2000/14/EC)
Choke
On-Off Switch
Wheel Rotating Direction
Max Spindle Speed/Rated Spindle Speed
Rated Spindle Speed min
-1
Max Spindle speed min
-1
No Fire Allowed
Read and follow this operator's
manual. Failure to do so could result
in serious injury.
Always wear an ear muffler, a
dustproof mask, goggles, and a
helmet when operating this machine.
BE AWARE OF KICKBACK!
Kickback may force the cutting-
off wheel up and back toward
the operator with a lightning-fast
reaction. Kickback can occur
whenever the upper-half of the
cutting-off wheel touches an object
while operating the machine.
- EC7500/EC7600 1
- ENGINE CUTOFF SAW 1
- Introduction 2
- Attention Statements 2
- Contents 2
- Safety Precautions 3
- Figure 1 4
- Figure 2 4
- Figure 3 4
- Safety Labels 5
- Unit Description 6
- Specifications 6
- Prior to assembly 7
- Mounting the Cut-off Wheel 7
- Mixing fuel 8
- Filling the fuel tank 8
- Starting a cold engine 9
- If the engine doesn’t start 9
- Starting a warm engine 9
- Stopping the Engine 10
- Wet or Dry Operation 11
- Adjusting Wheel Guard Angle 11
- Operating (continued) 12
- EC7500.48 13
- Cleaning the Air Cleaner 13
- Figure 24 14
- Figure 23 14
- Adjusting Belt Tension 15
- Replacing the Drive Belt 15
- Checking the Cut-off Wheel 15
- EC7500.42 16
- Replacing the Cut-off Wheel 16
- Checking the Fuel Filter 16
- Spark Arrester Maintenance 17
- Troubleshooting Guide 18
- DECLARATION 19
- CONFORMITY 19
- DÉCOUPEUSE THERMIQUE 23
- Mises en garde 24
- Table des matières 24
- Consignes de sécurité 25
- Consignes de sécurité (suite) 26
- Étiquettes de sécurité 27
- Description de l’appareil 28
- Caractéristiques techniques 28
- Avant l’assemblage 29
- Exemples de quantités de 30
- Démarrage d’un moteur froid 31
- Si le moteur ne démarre pas 31
- Démarrage d’un moteur chaud 31
- Arrêt du moteur 32
- Démarrage du moteur (suite) 32
- Fonctionnement 33
- Fonctionnement (suite) 34
- Nettoyage du filtre à air 35
- Figure 25 37
- Figure 26 37
- Figure 27 37
- Figure 28 37
- AVERTISSEMENT ! 38
- Entretien du pare-etincelles 39
- Guide de dépannage 40
- DÉCLARATION 41
- CONFORMITÉ 41
- REMARQUES : 42
- MOTOTRONCATRICE 45
- Sommario 46
- Messaggi informativi 46
- Introduzione 46
- Precauzioni di sicurezza 47
- Etichette di sicurezza 49
- Descrizione dell’attrezzo 50
- Specifiche tecniche 50
- Montaggio del disco da taglio 51
- Prima dell’assemblaggio 51
- Rifornimento del serbatoio 52
- Avviamento del motore a caldo 53
- Se il motore non si avvia 53
- Avviamento del motore (cont.) 54
- Arresto del motore 54
- Funzionamento 55
- Funzionamento (cont.) 56
- Pulizia del filtro dell’aria 57
- Figura 23 58
- Figura 24 58
- Controllo del disco da taglio 59
- AVVERTENZA! 60
- Figura 32 61
- Figura 33 61
- Risoluzione dei problemi 62
- DICHIARAZIONE 63
- DI CONFORMITÀ 63
- Italiano 64
- TRENNSCHLEIFER 65
- Einführung 66
- Wichtige Hinweise 66
- Vorsichtsmaßnahmen 67
- Abbildung 1 68
- Abbildung 2 68
- Arbeiten Sie immer unter 68
- Brusthöhe 68
- Abbildung 3 68
- Sicherheitsaufkleber 69
- Technische Daten 70
- Gerätebeschreibung 70
- Vor dem Zusammenbau 71
- Montieren der Trennscheibe 71
- Beispiele für 72
- Kaltstart des Motors 73
- Warmstart des Motors 73
- Ausschalten des Motors 74
- Trennschleifen 75
- Nass- oder Trockenbetrieb 75
- Betrieb (Fortsetzung) 76
- Reinigen des Luftfilters 77
- Abbildung 23 78
- Abbildung 24 78
- Einstellen der Riemenspannung 79
- Überprüfen der Trennscheibe 79
- Auswechseln der Trennscheibe 80
- Schmieren des Kupplungslagers 81
- Fehlerbehebung 82
- KONFORMITÄTSERKLÄRUNG 83
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.120 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji